top of page



Spynel-M is a cost-effective, solid & compact solution for wide area surveillance. This cutting-edge IR sensor benefits from 15 years of expertise in major security projects! Its dimensions ? Less than 12x20 cm, and weight of only 1.8 kg. As compact as it may be, Spynel-M is not less reliable : Spynel-M is a high-resolution 360° thermal camera, acting as an infrared radar. Capturing 24/7 full panoramic infrared images every second, it offers real-time security against any type of threats, conventional and asymmetrical, including hardly detectable targets (UAVs, RIBs, swimmers...)

Critical infrastructure security, with one single sensor!

Did you know that one single Spynel-M camera can perform 24/7 early human intrusion alerts over a 1.5 km-diameter area? It means it can replace 16 traditional cameras over 360°! 

Easily transportable, Spynel-M can be carried in a backpack and then deployed very quickly at the top of a building or on a mast. The sensor requires 5 watts of power only, but can also work with solar/ alternate power supply systems. This is very convenient for a remote operation! Spynel-M does not need additional light source: it is indeed entirely passive, and it cannot be jammed. The newest member of the Spynel family operates with Cyclope, your advanced intrusion detection software, which tracks and detects multiple targets coming from any direction, in daylight or total darkness, and under any type of weather conditions. 

A Visible Channel and a Laser Range Finder for a better detection and tracking of UAVs:


The Visible Channel is a full HD camera with a continuous optical zoom (x30), allowing to zoom in on a threat. The UAV is detected and tracked by the Spynel sensor, thanks to its panoramic detection system operated by the Cyclope software. With this brand new continuous optical zoom, the user can keep an eye on the threat during the identification phase. The Visible Channel enables to identify all types of objects located within the Spynel’s detection range, even the smallest drones!

The eyesafe Laser Range Finder provides the user with the exact distance of all detected threats on land, at sea or in the air, regardless of their size. The perfect tool to track micro-drones!

The V-LRF option was awarded Best Anti-drone system at the Milipol Show 2017


ABSOLUTE PRO™ perimeter intrusion detection system (PIDS) is a high security IP based modular Dual Technology barrier that combines unique new digital bi-directional with optical synchronization IR beam and digital microwave technologies within one unit. Developed for long range outdoor surveillances (up to 200m coverage between transmitter and receiver unit) for high risk areas located in critical environments where conventional technologies fail to grant continuous proper operations, ABSOLUTE PRO™ is the unique active barrier able to properly keep a high security degree during thick fog, heavy rain, strong snowfalls and sandstorms times. The system provides for maximum reliability of intruder detection with minimum false alarms and can be custom designed to any height and component array suiting each security requirement.

Without any additional interface, ABSOLUTE PRO™ barriers can be easily integrated into existent or new IP backbone networks virtually in any locations. Advantages of IP network solutions include remote accessibility for system maintenance and diagnostic, easy connection, better scalability, flexibility and installation cost-effectiveness.

5-DS - 5 Detection Scenarios

Being each IR beam inside ABSOLUTE PRO™ equipped with a microprocessor, individual crossing parameters can be set and up to 5 multiple intrusion detection scenarios can be configured for better filtering nuisance alarms caused by random animal activities such as flying birds and small/medium wilde animals keeping a high capability of real intrusions detection.

SEA - Signal Efficiency Analysis

An other key innovation in ABSOLUTE PRO™ is the introduction of the Signal Efficiency Analysis (SEA), a predictive maintenance tool which continuously monitors the optical communication stability and efficiency of each IR beam alerting security operators when the system requires a maintenance inspection. SEA as an instance set off when columns front cover accumulation of dirt has reached critical levels or when IR beam modules are close to end of their life.


Thanks to the already patented bi-directional IR beam technology, IMT barriers (above all Avantgarde™ which is equipped with IR beam technology only) are completely immune to direct solar rays or e.g. car’s headlights often main cause of nuisance alarms in conventional IR Beam barriers.


Data communication between ABSOLUTE PRO™ Slave (TX) and Master (RX) units are optical and do not require any SYNC cable which makes installation procedures longer and costly. The safety of the optical data transmission is guaranteed by a continuous regeneration of specific codes protected with checksums.

TDA - Target Direction Analysis

ABSOLUTE PRO™ provides not only simple alarm information but even target direction (IN or OUT) information which makes target tracking with perimeter CCTV cameras easier and more accurate. Directions can be filtered according to client requirments and internal security procedures.


ABSOLUTE PRO™ can adapt itself to any drastic environmental changing such as big snow falls, growing grass or sand storms by simply disabling without additional wire connections from the control room those IR beams temporally covered by high layer of snow or sand preserving its high capability of detection.


FiberPatrol FP7000 fiber optic pipeline integrity monitoring system

The FiberPatrol FP7000 enhances integrity management programs for both gas and liquid-carrying pipelines by providing early detection of leaks and third-party interference (TPI).

Combining Distributed Differential Temperature Sensing (DDTS) and Distributed Acoustic Sensing (DAS) technologies, the FP7000 detects and locates small leaks faster and more accurately than traditional flow and pressure-monitoring solutions, while TPI detection helps to avoid leaks in the first place by detecting digging or tampering before damage can occur.

Features and benefits

  • Detect and locate pipeline leaks and third-party interference (TPI) over a distance of up to 40 km (24.9 mi) per processor

  • Pinpoint leak and TPI events with an accuracy of ±10 m (±33 ft)

  • Combined Distributed Acoustic Sensing (DAS) and Distributed Differential Temperature Sensing (DDTS) for optimized leak detection:

    • Detect small leaks in both liquid and gas pipelines (below 1% of capacity)

    • Detect leaks during all phases of pipeline operation (filling, steady-state operation, and draining)

  • Buried fiber optic cable is EMI and lightning immune

  • Can also be used for fence-mounted intrusion detection

  • Continues to operate up to the point of a cable cut – 100% cut immunity when in redundant configuration

  • Software-configurable detection zones

  • System can use available fibers in existing communications/SCADA cable

  • No electronics, power, or communication infrastructure required along pipeline

  • Alarms reported by zone number, meter mark, and GPS coordinates

  • Flexible integrations with security management and SCADA systems

How it works

FiberPatrol works by transmitting pulses of laser light into an optical fiber and accurately measuring the minute light reflections that occur along its length. Using a patented technique based on Coherent Optical Time Domain Reflectometry (C-OTDR) principles, the FP7000’s DDTS function can detect temperature rates of change as low as 0.001°C per minute. This extreme sensitivity enables the FP7000 to detect smaller leaks than what is possible with any other leak detection system.

bottom of page